An interactive documentation interface can be found here: https://runjumplabs.github.io/dreammaker_fx/docs/
An interactive documentation interface can be found here: https://runjumplabs.github.io/dreammaker_fx/docs/
An interactive documentation interface can be found here: https://runjumplabs.github.io/dreammaker_fx/docs/
Double looper
Created by: DreamMaker
Delays-And-Loopers
This effect uses two independent loopers. The duration of the second looper is synchronized to the first. Hold down the left footswitch to record the first loop. Then hold down the right footswitch to record a second layer. Tapping either of the footswitches after the record will clear that loop. The left pot controls loop 1 volume, the right pot controls loop 2 volume and the center pot controls a gentle low-pass filter over the loops.

Filter
Primary loop mix
Secondary loop mix
Record primary
Record secondary
Sets cutoff of low-pass filter that loops run through
Sets volume of primary loop controlled with left switch
Records the primary loop
Sets the volume of the secondary loop controlled with right swtich
Records the secondary loop