Featured

No video 

Pentatonic Theremin

This sketch uses an external distance sensor connected to the sensor interface to create a theremin like experience. This pedal applies note quantization so it only plays pen...

synth

No video 

The Separator

This is an effect I've always wanted to try that I built on DreamMaker FX. Essentially, the low guitar string notes are filtered and sent through a marching delay line and th...

filters, gain

No video 

Purple Cobra

A tight distortion with an optional bass octave element...

distortion, octave

No Video

Pentatonic Theremin

This sketch uses an external distance sensor connected to the sensor interface to create a theremin like experience. This pedal applies note quantization so it only plays pentatonic notes based on the distance measured by the sensor. It also generates a second harmony tone (a few steps back in the pentatonic).

To use this, you need to install the Arduino Sparkfun library for the board which you can find here:
https://learn.sparkfun.com/tutorials/qwiic-distance-sensor-vl53l1x-hookup-guide?_ga=2.202506449.1723212710.1578948721-525563879.1574097026

(scroll down to Arduino Library about half way down the page)

No Video

Basic Delay Effect

This sketch uses an external distance sensor connected to the sensor interface to create a theremin like experience. This pedal applies note quantization so it only plays pentatonic notes based on the distance measured by the sensor. It also generates a second harmony tone (a few steps back in the pentatonic).

To use this, you need to install the Arduino Sparkfun library for the board which you can find here:
https://learn.sparkfun.com/tutorials/qwiic-distance-sensor-vl53l1x-hookup-guide?_ga=2.202506449.1723212710.1578948721-525563879.1574097026

(scroll down to Arduino Library about half way down the page)

No Video

Purple Cobra

This sketch uses an external distance sensor connected to the sensor interface to create a theremin like experience. This pedal applies note quantization so it only plays pentatonic notes based on the distance measured by the sensor. It also generates a second harmony tone (a few steps back in the pentatonic).

To use this, you need to install the Arduino Sparkfun library for the board which you can find here:
https://learn.sparkfun.com/tutorials/qwiic-distance-sensor-vl53l1x-hookup-guide?_ga=2.202506449.1723212710.1578948721-525563879.1574097026

(scroll down to Arduino Library about half way down the page)

No Video

Formant auto-wah

This sketch uses an external distance sensor connected to the sensor interface to create a theremin like experience. This pedal applies note quantization so it only plays pentatonic notes based on the distance measured by the sensor. It also generates a second harmony tone (a few steps back in the pentatonic).

To use this, you need to install the Arduino Sparkfun library for the board which you can find here:
https://learn.sparkfun.com/tutorials/qwiic-distance-sensor-vl53l1x-hookup-guide?_ga=2.202506449.1723212710.1578948721-525563879.1574097026

(scroll down to Arduino Library about half way down the page)

No Video

Double Looper

This sketch uses an external distance sensor connected to the sensor interface to create a theremin like experience. This pedal applies note quantization so it only plays pentatonic notes based on the distance measured by the sensor. It also generates a second harmony tone (a few steps back in the pentatonic).

To use this, you need to install the Arduino Sparkfun library for the board which you can find here:
https://learn.sparkfun.com/tutorials/qwiic-distance-sensor-vl53l1x-hookup-guide?_ga=2.202506449.1723212710.1578948721-525563879.1574097026

(scroll down to Arduino Library about half way down the page)

No Video

The Separator

This sketch uses an external distance sensor connected to the sensor interface to create a theremin like experience. This pedal applies note quantization so it only plays pentatonic notes based on the distance measured by the sensor. It also generates a second harmony tone (a few steps back in the pentatonic).

To use this, you need to install the Arduino Sparkfun library for the board which you can find here:
https://learn.sparkfun.com/tutorials/qwiic-distance-sensor-vl53l1x-hookup-guide?_ga=2.202506449.1723212710.1578948721-525563879.1574097026

(scroll down to Arduino Library about half way down the page)

No Video

Harmonic Tremy

This sketch uses an external distance sensor connected to the sensor interface to create a theremin like experience. This pedal applies note quantization so it only plays pentatonic notes based on the distance measured by the sensor. It also generates a second harmony tone (a few steps back in the pentatonic).

To use this, you need to install the Arduino Sparkfun library for the board which you can find here:
https://learn.sparkfun.com/tutorials/qwiic-distance-sensor-vl53l1x-hookup-guide?_ga=2.202506449.1723212710.1578948721-525563879.1574097026

(scroll down to Arduino Library about half way down the page)

Browse all effects

© 2020 DreamMaker FX by Run Jump Labs

  • Twitter - White Circle
  • Instagram - White Circle